|
4.0 Floor
4.1
A 4" insulated (R-32) prefabricated floor shall be supplied. The floor shall be reinforced with woven fiberglass matting on top of a
1/2" plywood sub floor bonded to the urethane core forming a watertight seal. A skid resistant surface coating will be applied to the
floor surface. The floor shall be constructed for permanent elevation 11/2" above grade. The elevation provides for air circulation
under the floor to eliminate corrosion and the need for an insulated and / or ventilated slab. A welded, heavy-duty steel frame
shall be encased in fiberglass and permanently bonded to the floor to ensure total portability without damage to the walk-in. The
floor shall have the capacity to support 400 Ibs. / sq. ft. of evenly distributed load.
Back to Specs
|